At EasyTechJunkie, we're committed to delivering accurate, trustworthy information. Our expert-authored content is rigorously fact-checked and sourced from credible authorities. Discover how we uphold the highest standards in providing you with reliable knowledge.

Learn more...

What is a Potentiometer?

Sanika B.
Sanika B.

A potentiometer is a manually adjustable electrical resistor that uses three terminals. In many electrical devices, potentiometers are what establish the levels of output. For example, in a loudspeaker, a potentiometer is used to adjust the volume. In a television set, computer monitor or light dimmer, it can be used to control the brightness of the screen or light bulb.

How It Works


Potentiometers, sometimes called pots, are relatively simple devices. One terminal of the potentiometer is connected to a power source, and another is hooked up to a ground — a point with no voltage or resistance and which serves as a neutral reference point. The third terminal slides across a strip of resistive material. This resistive strip generally has a low resistance at one end, and its resistance gradually increases to a maximum resistance at the other end. The third terminal serves as the connection between the power source and ground, and it usually is operated by the user through the use of a knob or lever.

The user can adjust the position of the third terminal along the resistive strip to manually increase or decrease resistance. The amount of resistance determines how much current flows through a circuit. When used to regulate current, the potentiometer is limited by the maximum resistivity of the strip.

Controlling Voltage

Potentiometers also can be used to control the potential difference, or voltage, across circuits. The setup involved in utilizing a potentiometer for this purpose is a little more complicated. It involves two circuits, with the first circuit consisting of a cell and a resistor. At one end, the cell is connected in series to the second circuit, and at the other end, it is connected to a potentiometer in parallel with the second circuit.

The potentiometer in this arrangement drops the voltage by an amount equal to the ratio between the resistance allowed by the position of the third terminal and the highest possible resistivity of the strip. In other words, if the knob controlling the resistance is positioned at the exact halfway point on the resistive strip, then the output voltage will drop by exactly 50 percent, no matter what the input voltage is. Unlike with electrical current regulation, voltage regulation is not limited by the maximum resistivity of the strip.


When only two of the three terminals are used, the potentiometer acts as a type of variable resistor called a rheostat. One end terminal is used, along with the sliding terminal. Rheostats typically are used to handle higher levels of current or higher voltage than potentiometers. For example, rheostats might be used to control motors in industrial machinery.

Discussion Comments


How long (hours or days, etc, as a crude average) a 9 volt battery can be used to run an Araduino Uno board with a Arduino LCD Shield hooked to it?


Some places on the web kin of blur the line between a potentiometers and rotary encoders. Can you delineate the differences between the two?


Can the potentiometer used to change polarity? Can it be used for reversing motors?


When does the resistance between terminal 1 and 2 vary the potentiometer's shaft?


How much supply is needed to control the voltage on a potentiometer?


Thanks for making the subject easy to understand.


what is the difference between linear and rotary potentiometers?


potentiometer is what kind of transducer?


Can I use a potentiometer for glycerine analysis?

Thanks, Kamran S.


Is there a color standard for a potentiometer? What is it, and what are the classification of the different colors?


what is the sensitivity of a potentiometer?


For anon300: If there are two terminals in a Potentiometer then it acts as rheostat.


what is the difference in rheostat and potentiometer?


what will be happen if there is no potentiometer in a circuit?


what is the value of that potentiometer? i mean is the maximum value when it is adjusted completely?


Its pretty f9 description, but please explain how to solve questions related to it in a better and easier way and understanding circuits given in complicated problems.


Twas a good description kind sir


Can a potentiometer be used to create an adjustable resistance, in place of a thermistor, to "fool" monitoring equipment?


Thank you for finally explaining in layman's terms what the heck a potentiometer is and how it is used! I have had to write up service reports from service technicians about potentionmeters and had no idea what they were talking about.


Thank you for the most straightforward description of a potentiometer I have come across so far.

It is incredible that you managed to convey the idea in words only.

Thanks again.


Definition for potentiometer is fine and but one small request if you give working principle of that with diagram, then it could be very good.

Thanking you Sir,

Muralikrishna Sharma. S

[email address removed]

Post your comments
Forgot password?
    • Potentiometer.